Subscribe to our newsletter

The ULTIMA 4000 cover will guard against the rigors of heavy traffic events. Tables, chairs, even stage and sound setups are a matter of course.

ultima-4000

Contact

Phone Jayline Australia on +61 2 4324 5266

Phone:
+61 2 4324 5266

Jayline Australia, 1/16 Jusfrute Drive, West Gosford NSW 2250, Australia

Address:
1/16 Jusfrute Drive, West Gosford,
NSW 2250 Australia

Send an email to Jayline Australia

Email:

Send a fax to Jayline Australia on +61 2 4325 0004

Fax:
+61 2 4325 0004

A Heavy Weight, Diamond Tread-Plate Pattern, Slip Resistant Cover

The desert sand side, with its anti-slip, diamond tread-plate pattern, is best for graduations and commencements, when decor is more important. The darker side is ideal for dances and concerts.

  • Diamond tread-plate pattern, anti-slip top surface
  • Can be used either side up
  • Designed for high frequency use
  • Suitable for any event
  • In single or dual colour combinations
  • ADA compliant, anti-slip friction co-efficient rating of 0.61

13 year warranty.

Material Properties Value
Surface finish Safety diamond tread plate pattern
Fabric core Single layer, woven polyester
Filament size 1500 denier
Core weight 5.3 oz/sq.yd.
Weave count 19 x 19
Coating P.V.C., knife coated process, not extrusion coated or laminate process
Total cover thickness 34 mils
Total cover weight Not less than 26 oz/sq.yd.
Mechanical Properties Value
Slip-resistant surface, ADA compliant 0.61 co-efficient of friction
Tensile strength 440 lbs.
Tear strength 120 lbs.
Adhesion 35 lbs./inch
Hydrostatic resistance 430 lbs./inch
Fire resistance- Material must meet these 5 fire resistant standards
  • California Fire Marshall
  • Underwriter Fire Protection Test
  • National Fire Protection Association
  • Connecticut Fire Marshall Class 1 Rating
  • State of New York Class A rating
Cover-Gard Material treated to resist odors and germs and to be rot and mildew resistant.
Construction Material should be in sections 10 ft. wide. All seams thermally welded with a minimum 1" lap weld.

Recommended Accessories

CoverMate II (for the Ultima Series) provides a unique Handling system provides an easy and safe method of installation, removal and storage of your Covermaster Floor Covers.

CoverClean Brush is for the CoverMate II speed up clean-up after use, reducing your labour efforts and costs. Sweep as you roll up with no extra effort.

CoverMate Storage Cover is the attractive way to cover and protect your CoverMate II.

Powermate Power Winder makes removing your Covermaster Sports Floor Cover a breeze.

Seaming Tape and TapeMate provide an easy, safe and non-messy method for joining Covermaster Floor Covers.