The GeoTerra construction mats are durable and reusable and eliminate the safety hazards and expense associated with classic timber or other heavier mat systems with less cost.
Geoterra Structural Mat System
Want a more economical, portable construction site access mat? Constructing access roads to utility transmission lines or wind farms over soft ground in difficult environments? Is a durable, reusable system needed for easy transportation to remote areas like oil drilling, mining operations and construction sites?
Economical For Heavy Load Support
An economical ground surface-reinforcement layer is created with GeoTerra mats to support vehicle and equipment loads. You'll find easy access over sand or soft ground and a low life-cycle cost through the system's ability to be disassembled, removed and reused several times.
High Strength, Flexible Layout Options
With a high crush strength, GeoTerra mats have the structural strength to support construction traffic or heavy equipment loads. They’re also light-weight, easy to transport, and "lock" together to form any layout requirement with the easy to connect and disassemble Padloc device.
Geoterra Anchors &Amp; Tools
The complete GeoTerra system includes Padloc connectors and may include earth anchors when additional stability is required.
GeoTerra Material: Recycled High-Density Polyethylene
GeoTerra Unit Size: 960 mm x 480 mm x 50 mm
If lighter-weight surface protection mats are desired, check out the GeoRunner system.
|Item||Specifications and Details|
|Material||High-Performance/High-Modulus Blend of Polyethylene|
|Color||Ranges from dark shades of gray to black|
|Carbon Black for Ultraviolet Light Stabilization||1.5% - 2.0%|
|Normal Dimensions (width X length)||0.48 m X 96 m (3.5 ft X 1.57 ft)|
|Normal Unit Depth||50 mm (2 in)|
|Normal Coverage Area||0.46 m² (4.95 ft²)|
|Cells per Unit||72|
|Cell Size||79 mm X 81 mm (3.1 in X 3.2 in)|
|Top Open Area per unit||87%|
|Bottom Open Area per unit||41%|
|Connection Device||PadLoc® Connector|
|Nominal Weight per Unit||4.11 kg (9.05 lb)|
|Units per Pallet||50|
|Unit Minimum Crush Strength @ 21°C (70°F)||2,900 kPa (420 psi)|
|Equivalent Elastic Stiffness, simply supported, @ 1 in (25 mm) deflection||140 N-m² (48,000 lb-in²)|
|Material Flexural Modulus at 23°C (73°F)||240,000 kPa (35,000 psi)|
Note: All dimensions, weight and values are subject to manufacturing tolerances.